Skip to the content

/32 Subnet (255.255.255.255)

A /32 is a single IP address with the subnet mask 255.255.255.255: one host, as used in routes, firewall rules and allow lists.

With or without a prefix: 192.168.1.10/24

/32

Network in CIDR notation

203.0.113.7/32

A single host address.

Network address
203.0.113.7
Broadcast address
None (single host)
First usable host
203.0.113.7
Last usable host
203.0.113.7
Usable hosts
1
Total addresses
1
Subnet mask
255.255.255.255
Wildcard mask
0.0.0.0
IP class
C, default mask /24
Address type
Reserved for documentation, TEST-NET-3 (RFC 5737), in 203.0.113.0/24

In binary

Address
11001011.00000000.01110001.00000111
Mask
11111111.11111111.11111111.11111111
Network
11001011.00000000.01110001.00000111

The line marks where the network part ends: 32 network bits to its left, 0 host bits to its right.

Split into smaller subnets

1 subnet of /32, 1 usable host each.

  1. 203.0.113.7/32Hosts 203.0.113.7Broadcast none
Share this tool:TwitterFacebookLinkedInWhatsAppEmail

/32 at a glance

Subnet mask
255.255.255.255
Mask in binary
11111111.11111111.11111111.11111111
Wildcard mask
0.0.0.0
Addresses in one network
1
Usable for hosts
1
Networks of this size
256 in a /24, 65,536 in a /16

In practice

All 32 bits are network bits, so nothing is left to tell hosts apart: the network is the one address. A /32 is not something you connect devices to. It is a way to say “exactly this address” where a network is expected.

You see it in firewall rules and allow lists (203.0.113.7/32 admits that one address), in routing tables as a route to a single host, and on the loopback interface of a router, which gets a /32 so that the router is reachable under one stable address.

The matching wildcard mask is 0.0.0.0: every bit has to match.

The subnet calculator takes any address with any prefix or mask, explains the address classes and the private ranges, and splits a network into subnets.